Home » Products » HF Antenna » GPS/GLONASS/COMPASS Antenna » GPS Antenna
GPS Antenna

GPS Antenna

GPS antennas are mainly used to receive and transmit GPS signals. They are widely used in navigating and positioning equipment, vehicles and handsets. We can offer various antennas and attachments, such as active antennas, passive antennas, cables, connectors, and so on.
Jinchang has developed various kinds of GPS antennas. Different LNA solutions and housings are provided to meet customers’ requirements on antenna’s appearance and mounting. There are three mounting methods: adsorbing with magnet, pasting with adhesive and fastening with screw. Magnet mounting is simple and convenient, because it can be adsorbed directly when there is a metal plate. Adhesive mounting has wide application range. For screw mounting, we now can offer three screw models: M10, M12 and M20.
A whole set of GPS antenna includes ceramic patch, LNA (low noise amplifier), cable, connector and housing (covering). GPS patch is the key part of the antenna. The patch sizes we can offer include 10 mm × 10 mm, 12 mm × 12 mm, 15 mm × 15 mm, 18 mm ×1 8 mm, 25 mm × 25 mm, 35 mm × 35 mm, etc.

1. Each product has been through five layer tests and FAQ sampling investigation. The first pass yield is 99%.
2. Our GPS antennas feature high gain, low loss and strong capability of receiving signals.
3. Protection grade is IP67 (ingress protection rating 67), which means our antennas are water proof.
4. The antenna is with corrosion resistance. It has passed 48 hours’ salt spray test.

1. Passive antenna and active antenna
2. Pre-filter antenna and post-filter antenna
3. First amplification antenna, second amplification antenna and third amplification antenna
4. High water proof degree antenna (IP68), general water proof degree antenna (IP67) and non water proof antenna

Parameters of GPS Antenna

Item Specifications
Antenna Center Frequency 1575.42 ± 1 (MHz)
Band Width CF ± 5 MHz
Polarization RHCP
Gain 5 dBic (Zenith)
V.S.W.R < 1.5
Impedance 50 Ω
Axial Ratio 3 dB (Max)
Dimension 25 × 25 × 4 (mm)
LNA Gain 28 ± 2 dB
Noise Figure < 1.5
Filter Insertion Loss < 3 dB
Ex-band Attenuation 12 dB at CF + 50 MHz / 16 dB at CF - 50MHz
Supply Voltage 2.2 V to 5 V DC
Current Consumption 5 mA to 15 mA
V.S.W.R < 2.0
Mechanical Cable RG174
Connector SMA / MCX / FAKRA or others
Radome Material ABS
Mounting Method Magnet/Adhesive
Environmental Operating Temperature Below 40℃ to 85℃
Relative Humidity Up to 95%
Ingress Protection IP67
Vibration 10 Hz to 55 Hz with 1.5 mm Amplitude 2 Hours
Environmentally Friendly ROHS Compliant

1. You should choose proper mounting method according to your installing locations.
2. According to customers’ requirements, we can offer GPS antennas with different features, such as water proof, salt spray prevention, UV resistance, and so on.
3. The antenna cannot be covered by metal plate in direction for receiving signals.
4. If there are any quality problems of our GPS antenna, you can get replacement or refund within one year and lifelong maintenance after buying.

The antenna is wrapped with plastic bag and put in a small white box which is packed in a carton (49.35 cm × 22.5 cm × 27 cm).

Jinchang is a professional manufacturer of GPS antennas. 28 years’ experience and more than 30 R&D engineers on antenna development guarantee that our products have been leading antenna industry. As a professional manufacturer of antennas, we can provide GPS antennas and accessories (cables, connectors, adapters, charger, etc.), which are widely used to make communication more convenient.

  • GLONASS AntennaGLONASS antenna is used to receive and transmit GPS and GLONASS signals in navigating and positioning equipment. It is usually applied in vehicles and handsets. A whole set of this antenna contains ceramic patch antenna, LNA, cable, connector and housing. Jinchang provides various antennas...